Glassing the interior This is what was I was working on over the last month. We call it the Bump Out. I removed 2 sets of double windows on the south west end of our sun room and pushed part of the wall out 18" so we could make the TV look built-in and have storage for Vicky's knitting supplies and a small cubby for Poppy to sleep in. Back to Unicorn! I put 8oz cloth (also called 8oz woven roving) on the entire interior surface of the hull to stiffen it and to make the interior more durable. As I mentioned in my previous post, this is the "expensive" cloth, but I STILL had problems with bubbles. They are less visible in this thicker cloth but what a PIA. Even with the thick cloth, the hull construction is clearly visible which was intended. I also started working on the rudder assembly and drive system. It turns out that my initial (apparent) success in drilling the drive shaft hole straight was not so successful afterall. If you look really closely at the picture sh...